FSODF-B

Product introduction

FSODF-Bseries optical fiber distribution frame is a new generation of large capacity, high density optical fiber distribution frame developed by FUSHIDA, which is mainly used for local trunk optical cable end and distribution in optical fiber network. The equipment can be connected, distributed and scheduled by cross connection and direct connection.

 

Product Features

1 Large capacity and high density;

2 Full modular design, the use of 12-core welding wiring integration module, each 72 cores for a unit subframe;

3 Card mounted FC, SC, LC, ST four adapters, the adapter and the front of the chassis at a certain Angle, not only to ensure the curvature of the jumper radius, but also to avoid arc burning eyes;

4 It can meet the end needs of both ribbon and non-ribbon optical cables;

5 Clearly marked, each core of fiber connection and distribution are clearly marked;

6 Each connection module can be extracted separately, easy to maintain and operate;

7 Reliable wall, back-to-back, side joint installation (with front and rear left and right jumper holes), full frontal operation;

8 The incoming and outgoing cables of optical cables, pigtails, and jumpers are independent and do not interfere with each other;

9 Reliable cable fixing, stripping, protective grounding device;

10 The optical splitting module can be installed (the optical splitting module is compatible with the installation size of the integration splicing module) for GPON or EPON network system;

11 Provides the best management plan for jumper, beautiful wiring, easy to find;

12 Ensure that the bending radius of optical fiber or cable is greater than 30mm at any position;

13 Can enter the cable up and down, and exit the fiber up and down;

14 Meet YD/T 778-2006 industry standards;

 

Environment Requirements

Operating temperature: +5℃ ~ +40℃

Relative humidity: ≤85% (+30℃)

Atmospheric pressure: 70KPa ~ 106Kpa

Main Technical Specifications

Insertion loss: ≤0.2dB

UPC return loss: ≥50dB

APC return loss: ≥60dB

Durability life: > 1000 times

Lightning Protection Technical Specifications

The high voltage protection device of the cabinet should be insulated from the rack with an insulation resistance of no less than 1000MΩ/500V (direct current).

IR ≥1000 m Ω / 500 V

The resistance voltage between the high voltage protection device of the cabinet and the rack is not less than 3000V (DC) /min, no breakdown, no flare-up;

U≥3000V

 

 

 

 

 

 

Order guide

 

Product name	Model	Dimension(mm)	capacity
optical fiber distribution frame	FSODF-B26	2600×840×300	648 core
	FSODF-B22	2200×840×300	504 core
	FSODF-B20	2000×840×300	408 core